This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Two holes in boss on casting?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 36
- Joined: Wed Sep 29, 2004 7:36 pm
- Location: West Virginia
Two holes in boss on casting?
In the discussion about the right material for the fuel line there was a picture. In the picture, near the split line, there is a boss with two diagonal holes. What are/were these holes used for and what is the spongy material in them?
So many tractors, so little time.