Hi gang,
Does anyone know if a low-boy snowplow will fit on a Cub? If there is a modification needed, what would I need to weld?
Thanks!!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Low boy snowplow on a Cub?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ScottyG
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
Low boy snowplow on a Cub?
"Henry" 1948 Farmall Cub
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Scotty, I run a lo-boy plow on a regular cub. I did not have to modify anything except I connected the lift arm the the opposite end of the rockshaft L bracket to get more lift. I just have to remember that down is up and up is down on the hydraulics. The push arms on the plow will always be angled downward which keeps the blade tilted forward somewhat but it works fine.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- ScottyG
- 10+ Years
- Posts: 422
- Joined: Sun Jul 18, 2004 7:49 pm
- Location: Watkins Glen, NY
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Hard to say but I would expect between $275 - $375 depending on condition.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: ericofmaine and 64 guests