What's a "Low Boy"? I was under the impression that at least two differences between a Low Boy and a regular Cub was the height of the tractor and an undermount exhaust on the Low Boy.
I have a 58 model Farmall Cub with SN (+or-) 200870J that appears to be the right height for a Cub but has an undermount exhaust. Was the undermount exhaust standard on both in the later models?
I hope this post goes through. Thanks to those who offered assistance before. The only thing I changed was to check the automatic log in.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Low Boy or Not
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 36
- Joined: Wed Sep 29, 2004 7:36 pm
- Location: West Virginia
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
The underslung exhaust was available on standard cubs as an option on the earlier models. It sounds like you have a standard cub with the underslung exhaust rather than a lo-boy.
Glad to see your post finally went through and welcome to the board.
Glad to see your post finally went through and welcome to the board.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 661
- Joined: Wed Mar 05, 2003 9:09 pm
- Zip Code: 18603
- Tractors Owned: 1948 Cub
1955 Cub - Location: PA, Berwick
-
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
You just need to add the 90 degree elbow to your existing manifold. Take a look at this page in the parts catalog:
http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%203/Group%2012%20-%20Power/Page%2012-16.jpg
http://www.cleancomputes.com/Cub/Cub%20Parts%20Manuals/TC-37F%20Revision%203/Group%2012%20-%20Power/Page%2012-16.jpg
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: No registered users and 3 guests