Exhaust Pipe Question

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Exhaust Pipe Question

Postby WJ » Tue Sep 28, 2004 7:25 pm

I am replacing the manifold on my cub and will need a new pipe also. Is there a correct length?? Some I see are really tall and some are just a few inches above the hood.

Thanks in advance.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
Bill V in Md
10+ Years
10+ Years
501 Club
501 Club
Posts: 653
Joined: Sun Feb 02, 2003 6:51 pm
Zip Code: 21228
Tractors Owned: 1948 Farmall Cub
Circle of Safety: Y
Location: MD, Catonsville

Exhaust Pipe

Postby Bill V in Md » Tue Sep 28, 2004 7:26 pm

Correct overall length is 17".
Bill VanHooser
Circle of Safety

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Re: Exhaust Pipe

Postby WJ » Tue Sep 28, 2004 7:29 pm

Bill V in MD wrote:Correct overall length is 17".
Is that galvanized pipe or black gas pipe or something else??
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Tue Sep 28, 2004 7:32 pm

Most people use black pipe, galvanized will turn dark if you work your tractor.
If you are not part of the solution,
you are part of the problem!!!

Donny M
5+ Years
5+ Years

Postby Donny M » Tue Sep 28, 2004 7:33 pm

I0,

Don't know what was original ( I assume black iron) but either will work. 8)

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Postby WJ » Tue Sep 28, 2004 7:34 pm

John *.?-!.* cub owner wrote:Most people use black pipe, galvanized will turn dark if you work your tractor.
Thanks for the help. What is the diameter of the pipe??

Thanks again,

Willis
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
Bill V in Md
10+ Years
10+ Years
501 Club
501 Club
Posts: 653
Joined: Sun Feb 02, 2003 6:51 pm
Zip Code: 21228
Tractors Owned: 1948 Farmall Cub
Circle of Safety: Y
Location: MD, Catonsville

Postby Bill V in Md » Tue Sep 28, 2004 7:40 pm

1" Schedule 40, Black Iron.
Bill VanHooser
Circle of Safety

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Postby WJ » Tue Sep 28, 2004 7:43 pm

Bill V in MD wrote:1" Schedule 40, Black Iron.
Thanks Bill. You've been a great help.
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

mmann
10+ Years
10+ Years
Posts: 40
Joined: Fri Sep 24, 2004 8:26 pm
Location: Prospect, Kentucky

Postby mmann » Tue Sep 28, 2004 8:07 pm

How does the muffler connect to the pipe? I have to replace the entire exhaust system on my NEW old Cub. The old manifold has a big hole in it. And the muffler was replaced with a length of 4'" diameter pipe going back down to a 1" angle. Previous owner made his own muffler! But I will replace the entire everything. How do I get the old manifold off without breaking the studs off the block? Help.

mmann

User avatar
Bill V in Md
10+ Years
10+ Years
501 Club
501 Club
Posts: 653
Joined: Sun Feb 02, 2003 6:51 pm
Zip Code: 21228
Tractors Owned: 1948 Farmall Cub
Circle of Safety: Y
Location: MD, Catonsville

exhaust pipe

Postby Bill V in Md » Tue Sep 28, 2004 8:49 pm

Muffler fits over exhaust pipe and is held in place by a clamp. Check out an earlier post on the subject "First Cub". There were some tips on removing the exhaust manifold.
Bill VanHooser
Circle of Safety

User avatar
parts man
10+ Years
10+ Years
501 Club
501 Club
Posts: 619
Joined: Wed Jul 30, 2003 9:41 pm
Location: Sussex N.B. Can.

Postby parts man » Tue Sep 28, 2004 9:46 pm

If you are buying a new manifold, they generally come with the pipe. :wink:
V.P. of T.S.A. (taking stuff apart)

User avatar
Scott C
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 178
Joined: Mon Mar 03, 2003 7:46 pm
Location: Charleston, WV

Postby Scott C » Wed Sep 29, 2004 9:19 am

Io,
I was able to get a little creative with mine, I happened to have some 1" stainless.
Image

User avatar
johnbron
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Location: Puyallup, WA.

Postby johnbron » Wed Sep 29, 2004 10:33 am

Scott C wrote:Io,
I was able to get a little creative with mine, I happened to have some 1" stainless.



Scott, Your muffler looks awfully shine`y. Is it chromed or just have a chrome type of paint on it?.
Then came Bronson

User avatar
WJ
10+ Years
10+ Years
Cub Star!!
Cub Star!!
Posts: 382
Joined: Sun Jun 13, 2004 10:18 am
Location: Weatherford, Ok

Postby WJ » Wed Sep 29, 2004 12:12 pm

parts man wrote:If you are buying a new manifold, they generally come with the pipe. :wink:
That's what I thought, but I didn't get one with mine. :cry:
If it doesn't move and it should, use WD-40. If it moves and shouldn't, use duct tape.

User avatar
Scott C
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 178
Joined: Mon Mar 03, 2003 7:46 pm
Location: Charleston, WV

Postby Scott C » Wed Sep 29, 2004 1:28 pm

John,
That's just a new muffler, it had a straight pipe on it before.
I thought, why don't I just change that out? I have a piece of stainless pipe, went out and bought a muffler. As soon as I touched it, the pipe came off at the manifold and left it's threads behind.
So......... off came the manifold....... buy a 1" pipe tap to chase the threads. It's never simple. You can see in the picture, I didn't even have a clamp on the muffler yet.


Return to “Farmall Cub”

Who is online

Users browsing this forum: Bbhzx12, DieselDennis, Gerry Powell, Glen, JMurphy, ricky racer, SBoySmith7033@kindle.com and 6 guests