Rear work light

This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Post Reply

4 posts • Page 1 of 1

Ron: 10+ Years; Posts: 80; Joined: Sat Feb 08, 2003 11:23 am; Location: Columbus, Georgia

Rear work light

Quote

Postby Ron » Mon Sep 27, 2004 11:41 am

Hi,

My rear work light in burned out.
I was under the impression that it was the same as the two front lights.

I have discovered that the rear is a sealed beam instead of the 1133 bulb that is in the front.

Is the rear supposed to be a sealed beam?
If so, do any of you guys know what number sealed beam to buy for a replacement?

Thanks,

Ron

1951 Farmall Cub

Top

SPONSOR AD

Sponsor

Sponsor

Top

Bigdog: Team Cub Mentor; Posts: 24144; Joined: Sun Feb 02, 2003 12:50 pm; Zip Code: 43113; Circle of Safety: Y; Location: OH, Circleville; Contact:
Contact Bigdog

Website Yahoo Messenger

Quote

Postby Bigdog » Mon Sep 27, 2004 11:48 am

The rear work lights had 1133's in them too. Yours may have been replaced at some time with a sealed beam unit. You should be able to find a replacement 6 volt sealed beam at and IH dealer, TSC or auto parts store. The bulb number should be stamped on the back of the bulb.

Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!