Rear work light

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Rear work light

Postby Ron » Mon Sep 27, 2004 11:41 am

Hi,

My rear work light in burned out.
I was under the impression that it was the same as the two front lights.

I have discovered that the rear is a sealed beam instead of the 1133 bulb that is in the front.

Is the rear supposed to be a sealed beam?
If so, do any of you guys know what number sealed beam to buy for a replacement?

Thanks,

Ron
1951 Farmall Cub
Ron
Cub Star
Cub Star
 
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Postby Bigdog » Mon Sep 27, 2004 11:48 am

The rear work lights had 1133's in them too. Yours may have been replaced at some time with a sealed beam unit. You should be able to find a replacement 6 volt sealed beam at and IH dealer, TSC or auto parts store. The bulb number should be stamped on the back of the bulb.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23814
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby Ron » Mon Sep 27, 2004 12:24 pm

Thanks Bigdog!!!!
1951 Farmall Cub
Ron
Cub Star
Cub Star
 
Posts: 80
Joined: Sat Feb 08, 2003 11:23 am
Location: Columbus, Georgia

Postby Dave F. » Tue Sep 28, 2004 7:26 am

Ron, If your sealed beam bulb has the two brass screw terminal, I think the bulb # is 4511 for 6V. Dave F.
Dave F.
Cub Star!!
Cub Star!!
 
Posts: 437
Joined: Fri Feb 07, 2003 12:36 pm
Location: WV, Morgantown


Return to Farmall Cub

Who is online

Users browsing this forum: jpcubs and 4 guests