This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
oil seal governor c-60 / 154 cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
Re: oil seal governor c-60 / 154 cub
from the picture I can see that the seal needs to go in further.I beleive the measurement from the surface where the distributer bolts on is 13/16 to the seal when installed correctly. Check in the service manuel, to be sure, it gives a measurement .
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: oil seal governor c-60 / 154 cub
Clark, the manual says 23 / 32 inch inside, I bumped it another 1/8th in, but do not dare go in further as idler gear in front cover gets up and close to the seal edge. thanks,Jim
-
- 5+ Years
- Posts: 2
- Joined: Mon Dec 19, 2016 10:00 am
- Zip Code: 44667
Re: oil seal governor c-60 / 154 cub
What is the number of the IH seal? - My dealer can not find it. I have a 184 - is it the same?
-
- Team Cub
- Posts: 17298
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: oil seal governor c-60 / 154 cub
It is the same. The IH number and a National cross are listed in the ATIS Cub FAQ as the line item:
Seal, Magneto Drive; 251379R91; National 450313.
You will find other parts listed that will be helpful later on.
http://www.atis.net/CubFAQ/cub_faq.html#q7
Seal, Magneto Drive; 251379R91; National 450313.
You will find other parts listed that will be helpful later on.
http://www.atis.net/CubFAQ/cub_faq.html#q7
-
- 5+ Years
- Posts: 2
- Joined: Mon Dec 19, 2016 10:00 am
- Zip Code: 44667
Re: oil seal governor c-60 / 154 cub
What is the best way to remove the old seal?
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 173
-
by Bill V in Md
Sun May 15, 2022 11:13 am
-
- 4
- 241
-
by Jim Becker
Sun Jul 03, 2022 9:08 pm
-
- 2
- 221
-
by Bill V in Md
Tue Nov 01, 2022 3:37 pm
-
- 4
- 305
-
by baldwindiesel
Mon Feb 21, 2022 5:09 pm
-
- 5
- 193
-
by Glen
Sat Sep 03, 2022 6:55 pm
Who is online
Users browsing this forum: No registered users and 6 guests