depth adjuster question
Posted: Wed Sep 01, 2004 2:10 pm
by dutch1
can anyone tell me how to set up the depth adjuster for a one bottom plow? any help would be appreciated
Jim
Posted: Wed Sep 01, 2004 2:13 pm
by Bigdog
Jim, it will vary with soil conditions, but if your plow is going too deep, pull the lever back to raise the front. If the plow will not sink into the ground, lower the front by pushing the lever forward so the point can penetrate.
Posted: Wed Sep 01, 2004 5:48 pm
by Jim Becker
If your question is how to mount the lever, look at these pictures.
http://www.tm-tractor.com/gim/193_plow_001.htm