Tue Aug 31, 2004 2:59 pm
I want to rebuild the engine in this 1952 Cub I just bought and am looking for any tips, manuals, comments, gotchas or anything else that would help do this right.
Are there any good engine rebuild manuals? I have bought the standard set from Binder Books.
All comments appreciated.
Tue Aug 31, 2004 5:03 pm
There is a good Video that is available through Valu-Bilt Tractor Parts (http://www.valu-bilt-com
). They are also a good source of manuals and parts (new and rebuilt).
Tue Aug 31, 2004 5:14 pm
The Manual Server has most of the info that you need. Check out the maintenance tips and techniques link and some judicious questions should be sufficient.
Remember, if possible, please take pics of your restore and make notes -- I certainly would like to have a documented restore with pics and a narrative to post on the server.......
Have fun, cause it will be
Wed Sep 01, 2004 9:28 am
let me know how getting the pully on and off is - it has been a bear for us. THere are post here about it, wish I would of read them first, as we broke a chunk off the pully using a gear puller - the pulley didn't fare too well going back on either.
Wed Sep 01, 2004 10:02 am
Bill Van Hooser wrote an excellent article on this very subject. Crankshaft Pulley Removal
This should help you out some.
Best thing for you to do now is to take the pulley off again, and replace it with one that isn't missing any pieces....
Chown Tractor Parts
JP Tractor Salvage
Tm Tractor Parts
should have what you will need.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.