This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch control question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 108
- Joined: Tue Nov 04, 2003 7:49 am
- Location: Milton, Florida
Touch control question
The owner's manual suggests that the touch control piston be in the retracted position (control leaver toward the seat) when not in use to limit it's exposure to moisture or other elements. If I park my tractor with the piston retracted (mower down), the unit will automatically lift the mower when next I try to start the Cub. Is this normal behavior? I'm concerned because lifting the mower seems to work the starter more than it should, and makes it harder to start the tractor.
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
Slappy, if the control lever has not been moved, the mower should not move when you start the engine.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 108
- Joined: Tue Nov 04, 2003 7:49 am
- Location: Milton, Florida
-
- 10+ Years
-
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
It could be as simple as not enough friction on the control lever or perhaps a sticking control valve spool. If you take a look at the touch control manual on Rudi's site, it has a troubleshooting chart.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 108
- Joined: Tue Nov 04, 2003 7:49 am
- Location: Milton, Florida
When I had the front end apart to fix the steering, I went ahead and took the control assembly off and replaced the spring and put some new friction disks in. IH dosen't support the disks and so I had to use a disk from a Ford and cut it down. Maybe this is the problem - my Cub is rejecting the friction disk transplant!
-
- 10+ Years
- Posts: 122
- Joined: Sun Feb 02, 2003 7:41 pm
- Location: Pa. Kemblesville
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Question on touch control arms Attachment(s)
by Workinprogress » Sat Feb 19, 2022 10:25 pm » in Farmall Cub - 4
- 285
-
by SamsFarm
Sun Feb 20, 2022 7:12 pm
-
-
-
Should this be used with touch control Attachment(s)
by cowridermi » Sun May 14, 2023 2:41 pm » in Farmall Cub - 2
- 234
-
by radioguy41
Sun May 14, 2023 5:07 pm
-
-
- 4
- 269
-
by Bill V in Md
Thu Feb 10, 2022 9:55 pm
-
- 5
- 1068
-
by Glen
Thu Dec 28, 2023 6:35 pm
-
- 6
- 362
-
by tinnerjohn
Wed Oct 06, 2021 11:43 am
Who is online
Users browsing this forum: No registered users and 7 guests