This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pulleys
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
Pulley sizes.
Aside from the stock Farmall pulleys, looking around the other day I found lots of different pulley sizes, most of which bolt up to a splined hub that goes directly on the PTO shaft.
I was recommended Tri-State Bearing as a source, and I purchased a ~7" hub and pulley for my Woods belly mower.
I'm assuming you're asking about the normal v-belt pulleys?
I was recommended Tri-State Bearing as a source, and I purchased a ~7" hub and pulley for my Woods belly mower.
I'm assuming you're asking about the normal v-belt pulleys?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Cub Pro
- Posts: 2809
- Joined: Sun Feb 02, 2003 2:31 am
- Zip Code: 00000
- Location: Puyallup, WA.
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
Tri-State is fast...
Just a quick note that the pulley from Tri-State arrived already... They work *fast* - I called the one in IN, and I'm in NY...
I didn't catch the reference to the shaft, but I see you're right from the service manual... I don't see any response to that question, though, maybe it was taken into the private message area?
I didn't catch the reference to the shaft, but I see you're right from the service manual... I don't see any response to that question, though, maybe it was taken into the private message area?
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
???
Wow!
I'll get you those part numbers ASAP. I have to go look for the receipt and I'll post an image of that if I can. Barring that I'll get the part numbers off the actual parts and post them.
I'll get you those part numbers ASAP. I have to go look for the receipt and I'll post an image of that if I can. Barring that I'll get the part numbers off the actual parts and post them.
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
TSB
By the way, are you calling the Tri-State Bearing in IN (Indiana)?
The one in NJ (Tri-State Bearing & Supply) will probably give you the response - I just called them and got the same thing although the fella was polite enough to say he'll call Browning on Monday and call me back (even though I told him I just bought one last month.)
The one I used was in Indiana and had the part numbers at their fingertips... Might have been Tri-State Bearing Co, 1640 Alonzo Watford Drive, Indianapolis, IN 46202, (317) 924-3287 but like I said I gotta find that darn receipt! Should have started a folder with all the parts receipts in one place a while back, but I was too excited to get the Cub running...
The one in NJ (Tri-State Bearing & Supply) will probably give you the response - I just called them and got the same thing although the fella was polite enough to say he'll call Browning on Monday and call me back (even though I told him I just bought one last month.)
The one I used was in Indiana and had the part numbers at their fingertips... Might have been Tri-State Bearing Co, 1640 Alonzo Watford Drive, Indianapolis, IN 46202, (317) 924-3287 but like I said I gotta find that darn receipt! Should have started a folder with all the parts receipts in one place a while back, but I was too excited to get the Cub running...
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
John *.?-!.* cub owner wrote:bob, are you by chance asking about a Cub Cadet?
I'm guessing a number series Cub.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- Cub Pro
- Posts: 1795
- Joined: Sat Jul 31, 2004 10:37 pm
- Zip Code: 12020
- Location: NY, Saratoga Springs
OK, got it!!
Sorry for the delay and the guesses, I have the receipt, and here's the information...
Tri-State Bearing Company
2108 N. Fares Avenue
P.O. Box 4737
Evansville, IN
47724-0737
Tel (812) 425-1336
Fax (812) 421-6788
Stock Number BRO H.978-10INV F-Bushing;Splined D2408 $6.58
Stock Number BRO BK62H Sheave F0506 $28.47
Tri-State Bearing Company
2108 N. Fares Avenue
P.O. Box 4737
Evansville, IN
47724-0737
Tel (812) 425-1336
Fax (812) 421-6788
Stock Number BRO H.978-10INV F-Bushing;Splined D2408 $6.58
Stock Number BRO BK62H Sheave F0506 $28.47
Searchable Cub Parts Database and Manual Galleries at www.farmallcub.info - Computerized Carving at www.bitcarving.com
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8
- 476
-
by Cubfriend
Sat Feb 17, 2024 10:09 am
Who is online
Users browsing this forum: JNewton and 8 guests