Page 1 of 1
Carb/Manifold Gasket Cement?
Posted: Fri Aug 27, 2004 3:04 pm
by Arizona Mike
I installed a rebuilt carb on my '57 two weeks ago... This is another first for me. Its running fine, but I have not done any work with the tractor yet. A neighbor stopped over Wednesday afternoon. He said I should have used gasket cement on the new install. I did not use any...just a new gasket.
Should I remove the carb again and reinstall with gasket cement?
Thanks
Mike
Posted: Fri Aug 27, 2004 3:07 pm
by johnbron
I dont think it is necessary unless manifold or carb is warped. I never use cement on mine with no leaks.
Posted: Fri Aug 27, 2004 3:39 pm
by Rudi
If you use cement, you are going to have a devil of a time getting it off next time you have to change the gasket. I don't use anything BUT the gasket and it seals fine.
If you carb is warped, see instructions for lapping the flange on the server under Lurker Carl's Carb Fixes.
Posted: Fri Aug 27, 2004 6:50 pm
by John *.?-!.* cub owner
I agree with Rudi and Johnbron.
Posted: Fri Aug 27, 2004 9:43 pm
by Donny M
Posted: Sat Aug 28, 2004 2:40 pm
by Steve Butram
Mike . I would leave it alone if you got it to seal. no need to make more work for yourself. Steve