This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Substitute drawbar ?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 202
- Joined: Fri Mar 07, 2003 8:17 pm
- Zip Code: 00000
- Tractors Owned: 52 Cub Fast Hitch 68 Lo-Boy 66 Cub Cadet 125 100 Manure Spreader Wagner Loader
- Circle of Safety: Y
- Location: Hunterdon County N.J.
Substitute drawbar ?
I have been meaning to ask another question, I want to mount my blade in the belly grader position, I have a fast hitch and a loader on my tractor, the loader brackets mount where the substitute drawbar would normally go, has any one ever mounted their blade to the front of the hitch bail, welding up a bracket to put the blade in the intended position would be no problem, as the mounting pads on the drop housings have enough to contend with with the loader brackets being mounted there. Thanks for any suggestions T.J.
Blue Mountain Antique Gas and Steam Engine Association
- Dan Robertson
- 10+ Years
- Posts: 311
- Joined: Thu Feb 06, 2003 4:08 pm
- Zip Code: 47421
- eBay ID: gotowin
- Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater - Location: Bedford, IN
This is a blade and mount that I fabricated to go on my fast hitch cub. The mount goes back and pins to the final drives just above the fast hitch bail. The same holes that the rear cultivators would install in. This way I can still use the fast hitch with the blade mounted. Not exactly what you were requesting, but maybe an alternative.
Dan Robertson
We all make mistakes
I try to keep mine to a minimum
We all make mistakes
I try to keep mine to a minimum
- Dan Robertson
- 10+ Years
- Posts: 311
- Joined: Thu Feb 06, 2003 4:08 pm
- Zip Code: 47421
- eBay ID: gotowin
- Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater - Location: Bedford, IN
- Marion(57 Loboy)
- 10+ Years
- Posts: 688
- Joined: Sat Mar 29, 2003 4:17 pm
- Zip Code: 00000
- Tractors Owned: 1957 International Cub Loboy; C-3 finish mower; L-54 blade; L-F194 plow incl coulter and jointer;L-38 disk harrow. Leinbach FH back blade.
- Circle of Safety: Y
- Location: Canton, Ohio
Dan,
There's a genuine Cub gizmo for that. I found one a year or so ago. You can see a good pic of one at: http://farmallcub.com/gallery/album02
Check out pic 3 of 5. Works real good and doesn't stick out.
There's a genuine Cub gizmo for that. I found one a year or so ago. You can see a good pic of one at: http://farmallcub.com/gallery/album02
Check out pic 3 of 5. Works real good and doesn't stick out.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Who is online
Users browsing this forum: Cub driver, tst and 44 guests