Jack point
Posted: Sat Aug 07, 2004 5:28 pm
I've got Jay jacked up in the air, and now I've decided to take off the steering gear housing, as well as taking off the oil pan to get a good look into the underside of the engine.
I'm trying to take off the front axle assembly, but can't get to that last bolt, and everything is so covered in gunk I can't tell what is what... It's going to take some lookin' at the parts manuals
Is it OK to have Jay up on the jack from the clutch bell housing - extended forward it shouldn't do any damage, right? After all, the engine block is part of the whole tractor chassis, and should be able to take its own weight!
Took some real bangin' to get the front wheels off, by the way Evidently, spider poop is a powerful adhesive.
I'm trying to take off the front axle assembly, but can't get to that last bolt, and everything is so covered in gunk I can't tell what is what... It's going to take some lookin' at the parts manuals
Is it OK to have Jay up on the jack from the clutch bell housing - extended forward it shouldn't do any damage, right? After all, the engine block is part of the whole tractor chassis, and should be able to take its own weight!
Took some real bangin' to get the front wheels off, by the way Evidently, spider poop is a powerful adhesive.