Thanks DonnyM, John*%#*,
I was able to remove that yoke nut with no problem.
My rebuild was a complete success. 13 ring seals and 2 gaskets later, everything is back together. I did use Hytran to lubricate the seals during the install, BUT, the manual does say to use a quality "cup grease" on them to provide initial lubrication required before the Hytran starts to flow through the system. This block will now sit for who knows how long before it is put back on the tractor, as I am miles away from being done, but this really is one of the "biggies" completed and gets me that much closer to having this little beauty back together.
For those who may have doubts about tackling a rebuild on the touch control: Just Do It !
Once you start removing that first head bolt, you won't be able to stop. Make yourself a clean area to work after you have it opened up. You should always have your manual beside you following every step. It is also good to use a couple small containers labelled with the names of the check valve, safety valve, etc..........This way there is no chance of getting things mixed up. The manual shows very good pictures of the parts so that is a help also. I feel like I'm ready to turn Pro, so the rest of you should have no problem.
Have a nice day.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control Success !
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Touch Control Success !
Just Do It !
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
-
- 10+ Years
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Rudi,
Sorry, no pics.
I agree it would be nice, but no digital here. I'm thinking though, it would be a good idea to rip one open at a Cub-r-rama. Everyone there could get a good hands on, as well as pics being took. Or not.
Donny..don't feel bad, this is the first work I've done since maybe April.
Sorry, no pics.
I agree it would be nice, but no digital here. I'm thinking though, it would be a good idea to rip one open at a Cub-r-rama. Everyone there could get a good hands on, as well as pics being took. Or not.
Donny..don't feel bad, this is the first work I've done since maybe April.
Just Do It !
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Who is online
Users browsing this forum: Flemmingth, IHCubCadet147, Majestic-12 [Bot] and 57 guests