This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Front main seal on a '49
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 26
- Joined: Sat Jul 31, 2004 7:31 am
- Location: Alton NH
Front main seal on a '49
Any tricks to pulling the main seal ?? and replacing also any one have advice where to find pics on how the buzz saw mounts on the back TM doesn't have pics for that yet
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
When you pull the fan pulley, it comes off hard. use a bearing separator or some sort of backing behind the flanges. If you pull on the flanges, they will break. Some heat applied will help here.
Here is a picture of the buzz saw mounted. Maybe it will help.
By the way, welcome to the board.
Here is a picture of the buzz saw mounted. Maybe it will help.
By the way, welcome to the board.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: Don McCombs and 56 guests