Page 1 of 1
What are you using your FAST HITCH for??
Posted: Thu Jul 29, 2004 8:53 am
by Eric
Just thought I'd post a question asking what you guys here on the site were using your Fast Hitch for. I use mine to plow and disc my little field.
I was thinking about getting some landscaping implements by king kutter.
Let me know.
-Eric
Posted: Thu Jul 29, 2004 9:19 am
by cjpenny89
I use mine to plow, disk, haul tralier, back blade grading, buring wire (I made a wire bury attactment) I also looked at a king kutter land scape rake. I called them up and they do not make the 1-point rake anymore.
So I will buy one and make my own. The ideas are endless if you have a torch and a welder to cut off 3 point parts and weld on 1-point prongs.
Chad
Posted: Thu Jul 29, 2004 10:36 am
by Eric
Hey Chad,
Where do you buy your 1 pt prongs from? About how much are they?
-Eric
Posted: Thu Jul 29, 2004 10:39 am
by cjpenny89
I look for them in scrap pile on the side of the road I have got lucky and found them there. Ones from a super c will fit it.
you can also buy them here
http://www.agri-supply.com/
Chad
Posted: Sat Jul 31, 2004 3:55 pm
by welderrx
Mostly discing, moving fire wood on the carryall and pulling all manner of cart and wagons around the parents place. T.J.
Posted: Sat Jul 31, 2004 6:58 pm
by Marion(57 Loboy)
cj,
Please list the path to the fast hitch prongs at the ag supply website-couldn't find them!!
Thanks
Posted: Sun Aug 01, 2004 10:38 am
by Jim Reid
Bet money Ya'll ain't never tried this befofe i'm working on a boom pole to slide in the one point to pick up deer.
Posted: Sun Aug 01, 2004 10:51 am
by Jim Becker