Oil Filter

Mon Jul 26, 2004 9:28 am

I went to the local NAPA store for Plugs, cap, rotor and oil filter for my 58 cub The only thing they have is the Plugs. The guy says he can't get the other stuff. I can remember getting all that kind of stuff from napa for my Farmall A. Anyway has anyone changed the plugs on a cub without taking the tin off? It sure would be good if I did not have to.

Rick

Mon Jul 26, 2004 9:31 am

Rick, yes, it can be done. Take an air hose and blow the dirt etc. out before removing the plugs. Just use a combination wrench instead of a socket.

Mon Jul 26, 2004 9:39 am

I take my plugs out all the time with a socket and ratchet.
take your time it can be done.

Mon Jul 26, 2004 9:54 am

Thank You everyone for the info, I intend on giving it a try!

Rick

Mon Jul 26, 2004 11:47 am

Rick-

NAPA has those parts available. The counterman you talked to either is too new to know where to look or he doesn't want to bother looking it up.

Denny

Mon Jul 26, 2004 5:20 pm

Denny ('60 Lo-Boy) wrote:Rick-

NAPA has those parts available. The counterman you talked to either is too new to know where to look or he doesn't want to bother looking it up.

Denny


This is sad but true I just got an oil filter from them.napa#1153
wix 50053
AC P-321,fram C-235.

Napa should be able to cross Borg Waner # for cap HC2
rotor same HR2 these are for batt. ign.


Hope these #'s help

Mon Jul 26, 2004 5:57 pm

When I rebuilt my cub everything came from NAPA, Pistons , rings ,, bearings, gaskets, and carb kit. You have an I Don't Know? NAPA parts person. :roll:

Mon Jul 26, 2004 7:31 pm

Guys:

What is the NAPA part # for the rotor for the magneto?

Mon Jul 26, 2004 9:18 pm

Rudi,

I haven't been successful at finding a cross number for the rotors or the retainer. :cry: :cry: :cry:

Tue Jul 27, 2004 4:43 pm

Donny and all:

I take it the IH-300 at NAPA is for the distributor and NOT the Magneto?

Tue Jul 27, 2004 5:43 pm

The only place I know of to get the magneto rotor is Case/IH. I bought an aftermarket cap to go with mine when I first rebuilt it 17 years ago, and promptly broke the rotor. Ever since I get the caps from IH also.
Last edited by John *.?-!.* cub owner on Wed Jul 28, 2004 12:03 pm, edited 1 time in total.

Wed Jul 28, 2004 11:42 am

Rudi,

I believe you are correct. :)

Thu Jul 29, 2004 8:02 am

If you can't find the oil filter at Napa ask for Purerolator L20009. They are the ones I use.

Fri Jul 30, 2004 7:56 am

I went back to napa and spoke with a different parts person and was able to get all the items I needed. The IH300 is the rotor for the bat ing.
Thank You
Rick