Posted this on another board and got no response. Can someone help me out. B.I.L.'s tractor, no manuals. Thanks
I keep ordering(twice) IH288864R93 seal for a super a. They sent both times National 410083. I got the following info from a previous post. I need the seal that stays on the tractor when the final drive is removed. You have to take out 3 bolts to remove it. What do I need to order?
National seal numbers:
Final drive seal-- 410083, IH 71597 C91
Differential seal--- 410060 SSR, IH 288864 R93
Pinion cover gasket --- IH 1342398C1
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Super A seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Deane
- 10+ Years
- Posts: 18
- Joined: Sun Feb 09, 2003 5:31 am
- Location: Lenoir City, Tenn
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
I'm not very familiar with Super A, but it's design is similiar to a cub, and the seal that stays with the rear end housing on it is the differential seal, which is inside the retainer you take off with 3 bolts.
You can get manuals from http://www.binderbooks.com
You can get manuals from http://www.binderbooks.com
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
I think the seal you need is called: OIL SEAL, Differential ball bearing retainer. The IH number is 46 282 D, with numbers 358 773 R91, and 358 813 R91 listed as optional. There is what looks like an O-Ring in there, too, it is number 355 740 R1. (This may be a snap ring, it has been awhile since I had one apart). These numbers are from TC-39C page 169-170 reference numbers 26 (seal) and 27 (o-ring). Go to any Case/IH dealer or call Bermuda Ken at Carter and Gruenewald (1-866-FARMALL). He will have or can get the seals and will ship them to you. They are a great dealer to work with. Good Luck.
The four most expensive words in tractor restoration: "We might as well..."
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Deane:
If you go to the Cub Manual server at the link below, the Super A and Super AV Owner's Manual, Special Attachments Manual and the TC-39B Parts Manual are there as well.
Hope this might help a bit.
If you go to the Cub Manual server at the link below, the Super A and Super AV Owner's Manual, Special Attachments Manual and the TC-39B Parts Manual are there as well.
Hope this might help a bit.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: No registered users and 47 guests