This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Belt Pully

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
Ricaroo
10+ Years
10+ Years
Posts: 179
Joined: Sat Jun 19, 2004 5:37 pm
Location: New Hampshire

Belt Pully

Postby Ricaroo » Wed Jun 30, 2004 5:07 pm

I have the 90 degree pto attachment with the large drum pully, I guess you use it for a leather drive belt to operate a cord wood saw? Anyway, my question is can I remove the drum and install a V belt pully? I looked at the manual and it doesn't show if the shaft is the same as the pto shaft now on the tractor.

Rick

1958 cub with vertical exhaust
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Dale51
10+ Years
10+ Years
Posts: 568
Joined: Sun Aug 10, 2003 3:39 pm
Location: Wellsville NY

Postby Dale51 » Wed Jun 30, 2004 7:29 pm

Yes just unbolt the belt pully from the tractor and you will find the
reg. spline shaft right there.
You mite need to get some shorter bolts though as the same bolts hold the belt pully and the pto shaft so you are tru two castings after ward it will be just one casting.
PS: please be carfull when you try to remove the belt pully
or you could pull the pto shaft out also.

Hope this helps
If it's been broken I did it.
If its not broken wait till I touch it.
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Garvin Gatewood and 47 guests