Page 1 of 1

sources for wiring junction block

Posted: Thu Jun 24, 2004 3:25 pm
by jsmit
Gents,

Pardon my ignorance, but where can I get a new wiring junction block, I just bought a new complete wiring harness and some wires terminate at what is refered to as the "junction block". I know my tractor didn't have it before I took it apart, but I would like to install one now, so does anybody know where I can get one of these? They wouldn't be referring to the Off/On switch, the light switch, or any of the guages or fuse holder, would they?

Usually the answer to any where can you get it question is cngco.com! I can try there first I guess...

Thanks again, and again
Jay

Posted: Thu Jun 24, 2004 4:17 pm
by Wireharness
What is the year and ser# of your Cub?

There are 8 different main harness for the cub and cub loboy.

You may have the wrong harness for your tractor as many did not have a junction block

Posted: Fri Jun 25, 2004 8:14 am
by jsmit
Its a 1952 model, serial # is 153844, your help is much appreciated

Posted: Fri Jun 25, 2004 9:40 pm
by Wireharness
The main harness your tractor uses is 354252R91

I do not know if IH has that or not , if they do not we do.