Hi all,
I am currently rebuilding the IH carb that was on my cub. I have it all taken apart, and the warpage has been corrected according to Lurker Carl's instructions. It has also been bathed in carb cleaner. The only thing I have been pondering is the removal and replacement of the strainer screen. Does it just push out? It seems like I will destroy it. Does the new one just push in? Again, it seems too frail to squeeze into that little area without bending or breaking. I am just making sure, before I go ahead and regret not asking. Tips are appreciated.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How to change strainer screen in carb?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ChickenWing
- 10+ Years
- Posts: 108
- Joined: Sat May 22, 2004 1:46 am
- Location: MI, Temperance
- Dave.49.cub
- 10+ Years
- Posts: 66
- Joined: Fri Apr 16, 2004 10:43 am
- Zip Code: 45066
- Tractors Owned: 1949 Farmall Cub - Working Tractor -Mowing, log skidding, snow plowing.
1947 Farmall Cub - My Dad's - Location: OH, Springboro
Who is online
Users browsing this forum: No registered users and 46 guests