Page 1 of 1
Oil Filter Question
Posted: Mon May 31, 2004 9:55 am
by davajones
What is the proper oil filter for a 1948 Cub. I assume that this is not a full flow filter, and as such should have enough resistance to oil flow to ensure that the bearings are being oiled. Therefore a modern full flow filter would cause low oil pressure. Am I correct?
Posted: Mon May 31, 2004 10:26 am
by johnbron
Recommended filters from the (ATIS-BOARD).
AC P-321, Fram C-235
NAPA 1153, Wix 51153
Purolator L2008 or L2009
Fleetguard LF-672
Posted: Mon May 31, 2004 12:10 pm
by John *.?-!.* cub owner
I've never yet seen a full flow oil filter that would fit a cub.
Posted: Mon May 31, 2004 1:31 pm
by davajones
Good...then I can't screw up!! Thanks,