I am putting new bearings in my C-3 mower, the two outside pulleys (single groove) came off with no problem, the center pulley (triple groove) is giving me fits.
I removed the three 1/4" bolts from the split collet and screwed them into the holes that push the collet apart. they are too small in diameter and too long to torque on them very hard (I have already wrung one off!).
I have a three jaw puller on the pulley, but I am afraid of cranking on it too hard and breaking it.
Any suggestions on how to get this devil off w/o breaking something?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
can't get the *%#!! pulley off
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 377
- Joined: Tue Sep 30, 2003 7:52 pm
- Zip Code: 23047
- Location: Doswell, Virginia
- Contact:
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
-
- 10+ Years
- Posts: 377
- Joined: Tue Sep 30, 2003 7:52 pm
- Zip Code: 23047
- Location: Doswell, Virginia
- Contact:
Who is online
Users browsing this forum: No registered users and 55 guests