Farmall Cub

I'm getting ready to move the mid-mount grader blade from Casper to Scruffy, and need to make a couple missing parts. It's not installed correctly on Casper, so I'd like to make a couple original style parts. This will also give me down pressure... I'm presently using lifting chain.

What I need is dimensions for:
Front lifting rod 650 165 R91
lifting bracket 650 152 R1

If I have original material sizes and lengths, I'm sure I can make them.

Casper is getting ready to do the harrow work in the garden.

Thanks in advance...

Hello Mr. Willer

Why don't you call John at JP Tractor ( 573-783-7055). He might know these dimensions

Mike

George Willer wrote:What I need is dimensions for:
Front lifting rod 650 165 R91
lifting bracket 650 152 R1

George. Not exactly sure what those P/N's look like (can't locate them in my books), but if you can point me to a picture on Rudi's site, I can go out back and dig my blade stuff out to try and get dimensions for you........

George. Not exactly sure what those P/N's look like (can't locate them in my books), but if you can point me to a picture on Rudi's site, I can go out back and dig my blade stuff out to try and get dimensions for you........
_________________
Ron

I'd appreciate that, Ron. On Rudi's site, look at the HTML file manual for the McCormick Deerind leveling and grader blade. On page 13, they will be item #5 and #13.

George the rod on mine measures 21” long------9/16” dia. --the bends at ends are 90 deg. Opposite each other. Drilled for cotter pin. The bracket is ¼”by 2” 2 1/2”angel iron . Holes spaced 1” from ends -2 ½”
Side of angel goes up Hole of ½” dia. goes to bottom 9/16" for rod- Have picture of mine if you send me A email add. DAVE

George. Go with Dave's info. No wonder I couldn't find those P/N's. I have the later version (Cub 54A) with the "Spring lifting strap assy" in lieu of your "rod" set up........... Sorry