This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
no power - touch control
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7
- Joined: Sat Apr 03, 2004 7:40 pm
- Location: nj, oxford
no power - touch control
with some more tune -up work and governor adjustments, i've got my cub with enough power now to mow the lawn....one thing i've noticed though, some times when i use the touch control to lower the mower, it wants to keep on running and robs power from the engine/mower. i've got to jiggle the control lever back up a little to get it to stop. since i've got a bad fluid leak at the boot on the main shaft (i've been told there's an o-ring in there) i bought a repair kit and i'll be getting into the unit...my questions are 1. how complicated is this system and 2. besides the leak, is there something else in there that may be causing my power problem that i should be on the look-out for when i'm in there?? thanks alan
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
There is a stop clip on touch contorl unit that limits the travel of the control lever spool valve that probably needs adjustment. Go to Rudi's manual server, to the blueribbon manuals, and download the GSS-1024 touch control manual.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: Leewebb7 and 19 guests