Page 1 of 1

cub bolt

Posted: Sat Apr 17, 2004 6:43 pm
by bjgravley
when sitting on the cub to your right of the tool box on the floor pan right above the axle i have a bolt missing looks to be about 1/4 does anyone know the length and thread pitch thanks alot

Posted: Sat Apr 17, 2004 7:07 pm
by Rudi
Not sure which bolt you mean. Suggest you check out the Parts Manual.

Click this link: Seat and Platform

Let us know which bolt you mean....

Posted: Sat Apr 17, 2004 7:26 pm
by George Willer
B.J.,

It's 3/8-16. Probably either 3/4" or 1" would work.

cub bolts

Posted: Sun Apr 18, 2004 6:19 pm
by bjgravley
right on time as always george the 3/8 x16 bottom tapp went right in i'm replacing any missing bolts and replacing any bad ones i've been using grade 5 what grade did the fractory use thanks alot as always