Thanks to the knowledge from this board ( and parts from Wengers) I finally repaired my growling and PTO jumping CUB. Printing the repair from FAQ was a big help also! I replaced bushing,coupler, pto shaft, detent lever, d- spring, d-shaft, seals, bolts and gaskets. Also replaced fluid with 90# wt. Fired Elvira up and did some mowing Saturday. Thanks fellas, I looked just like I knew what I was doing. What a difference the new parts and lube made. Not only did it engage and disengage properly. It was so much quieter
Regards,
Larry Ball
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
pto repair (FINALLY)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 306
- Joined: Thu Jul 17, 2003 10:49 pm
- Location: KATY, TEXAS
pto repair (FINALLY)
LARRY BALL