Well today was the day to put the pistons back in the '67.
I had planned on using the original rings as they were OK, but new rod bearings would be going on.
Of all 4 pistons, only 1 ring was "stuck", I could not budge it out of the groove. It had been soaking in the secret formula for a few days but still no go. Snap! it broke! It reallly was rusted in there, weird.
Next I broke a oil control ring. I was having pretty good luck with the ring spreader too.
I guess I'll be ordering a new set of rings Monday. Hope I don't break any of those. Boy those oil control rings sure are stiff. Nothing like the Hastings that I used on the '49. I want to stick with IH, but I can't afford to break any of the new ones.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Dad-blasted-packa-flatta-raps!!!
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- EZ
- 10+ Years
- Posts: 1185
- Joined: Tue Feb 11, 2003 6:33 pm
- Zip Code: P0M1Z0
- Tractors Owned: 49 Cub
67 International Cub Loboy
57 Farmall 130 - Location: Northern Ontario
Dad-blasted-packa-flatta-raps!!!
Just Do It !
Who is online
Users browsing this forum: No registered users and 54 guests