Dimensions for fast hitch attachments

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
BillyJoeJimBob
5+ Years
5+ Years

Dimensions for fast hitch attachments

Postby BillyJoeJimBob » Sun Feb 22, 2004 3:50 pm

Hello all, I was hoping that some of you out there might have the dimensions for the arm on the attachments that would slide into the sleeve of the fast hitch on my tractor. I picked up a blade that I would like to convert into a back blade and would rather not waste my time guessing on the dimensions. Thanks guys.....

BillyJoeJimBob

Mike Schmudlach
10+ Years
10+ Years
501 Club
501 Club
Posts: 568
Joined: Wed Feb 05, 2003 11:15 pm
Location: Brooklyn, Swissconsin

Postby Mike Schmudlach » Sun Feb 22, 2004 5:02 pm

The one point arm is the same as all of the large point / 2 point implements that fit the 300 on up, well actually a 240 has the large point also. many times you can find the large point stuff at a junk yard cheap unlike the small point stuff for a Super S, 200 etc..
When I go back outside I can measure one for you. It is raining, sleeting and just down right nasty here in southern Wisconsin.
I head out for the IHCC Winter Convention on wednesday to FL.
Mike
30 + tractors including 2 French Super Cubs, French Cubs, 1963 Industrial Cub, 1955 Cub Highcrop etc...German and French built IH tractors and some bigger IH tractors. Of course I have about 20 IH trucks and an IH refridge in the Shop.

User avatar
George Willer
Cub Pro
Cub Pro
501 Club
501 Club
Posts: 7012
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont

Postby George Willer » Sun Feb 22, 2004 6:10 pm

Mike,

I've never had a fast hitch on anything. Do you think the drawing on "Sneaky" Peters' and "Fastlane" Freeman's bumper sticker is accurate?
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce

BillyJoeJimBob
5+ Years
5+ Years

Postby BillyJoeJimBob » Sun Feb 22, 2004 6:40 pm

Mike, I look forward to getting those dimensions from you. I understand that you wouldn't want to go out in that beautiful weather. The weather here in N.W. Pa hasn't been perfect either... Monday it was -10, Fri it was 55. I would prefer about 20 more degrees to the latter though.


Bill

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Feb 22, 2004 7:05 pm

I saw the points for sale on a web site recently, I'm trying to remeber where.. Seems like they were pretty reasonable.
If you are not part of the solution,
you are part of the problem!!!

BillyJoeJimBob
5+ Years
5+ Years

Postby BillyJoeJimBob » Sun Feb 22, 2004 8:02 pm

If you come across that web site, give me a holler!

Bill

russ
10+ Years
10+ Years
Posts: 10
Joined: Thu Jan 29, 2004 5:02 pm
Location: Central Michigan

Postby russ » Sun Feb 22, 2004 11:12 pm

I saw a pair of points on ebay today, do not recall cost,or exact location. You should try a search for ( farmall ) . Good luck. Russ

Dogman
5+ Years
5+ Years

Postby Dogman » Sun Feb 22, 2004 11:21 pm

I think this the one John was thinking of

http://www.agri-supply.com/catmain/4900016.htm

26021 EA 25 FAST HITCH LONG 30" 26.95
26022 EA 16 FAST HITCH SHORT 20" 24.95

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21531
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sun Feb 22, 2004 11:39 pm

Yup, that's it.
If you are not part of the solution,
you are part of the problem!!!

danovercash
10+ Years
10+ Years
501 Club
501 Club
Posts: 3361
Joined: Mon Feb 17, 2003 8:48 pm
Zip Code: 28081
Circle of Safety: Y
Location: NC, Kannapolis

Postby danovercash » Mon Feb 23, 2004 9:30 am

Lienbach machinery in Winston Salem has them. two sizes. around $25. Figure 12' from front of point to impliment. See harrow made with one on my site below. (13 tooth)
"I'd rather be a mechanic in the shop"- Henry Ford

252646 & 221525. 195897 (Gone, but not forgotten)

BillyJoeJimBob
5+ Years
5+ Years

Postby BillyJoeJimBob » Mon Feb 23, 2004 12:10 pm

thanks for the info on where to get those fast hitch parts. At that price, it sure beats making them myself!


Bill

welderrx
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 100
Joined: Fri Mar 07, 2003 8:17 pm
Location: Hunterdon County N.J.

Postby welderrx » Mon Feb 23, 2004 6:10 pm

Hi Dan I joined your group, I like the frame work that you made up for your grader blade. I am assuming that it installs into the cultivator sockets on the f-h mounting brackets. My plow was all cut up long ago to try to make it work on my loader, which I think probably only worked until it got up against its first immovable object and was deposited where my uncle left it until I dug it out 30 some odd years later. I think the chop saw and the mig might just have a little job to do this coming spring, thanks for the ideas. As for the F-H arms at agri supply do you know if these are the ones that fit on a cub, because I also have an old horse drawn harrow that we have used for years with a chain to drag but it would be nice to be able to travel down the road with it raised, and it would sure make it a lot easier at the end of the rows to be able to lift it and turn around. Thanks Welderr
52 Cub with fast hitch, 64 Cub Lo-Boy, 66 Cub Cadet 125, various fh attachments, pto sprayer, snow-dozer blade and Wagner loader

bob
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 145
Joined: Sun Feb 02, 2003 8:49 pm
Location: Nothern NJ

Postby bob » Mon Feb 23, 2004 6:19 pm

I bought 3 of the points from Agri supply and was very unhappy with the product. When comparing it with an original IH point it is a poor fitting unit. I'm very afraid to use them for fear of wearing out the socket on my tractor. The points are still available from IH/ Case but I don't have one within an hours drive.

welderrx
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 100
Joined: Fri Mar 07, 2003 8:17 pm
Location: Hunterdon County N.J.

Postby welderrx » Mon Feb 23, 2004 7:31 pm

Thanks for the reply Bob I have seen some after market name brand rake's made with a 1 point fast hitch, and the spear looked like it was cut out with a torch by a first week welding student with bad glasses and shakey hands and they were getting top dollar for them. I guess I will make my own thanks for the reply. T.J.
52 Cub with fast hitch, 64 Cub Lo-Boy, 66 Cub Cadet 125, various fh attachments, pto sprayer, snow-dozer blade and Wagner loader

bob
10+ Years
10+ Years
Cub Star
Cub Star
Posts: 145
Joined: Sun Feb 02, 2003 8:49 pm
Location: Nothern NJ

Postby bob » Mon Feb 23, 2004 7:39 pm

It might be tough to build without a milling machine. The original units were made with different tapers along its lengthThe leading point has a steep taper and the after the notch it is more gradual until its stop.Of course the bottom is flat.


Return to “Farmall Cub”

Who is online

Users browsing this forum: Arthur Luke, BIGHOSS, charlesellis and 8 guests