five blade disc harrow

[greybeard]

i bought a 60 cub in sept. the owner had five implements with it laying outside, been there probably 20 years, they are not in bad shape considering that, there is disc harrow with five discs on each half,it looks much like picture of cub f38 i have in book. that one has four discs, is this one for a cub or made for a larger tractor. thanks george

[Bigdog]

The 28A had 5 discs per side:

http://www.cleancomputes.com/Cub/Cub%20 ... e%2004.jpg

Does yours resemble this?

[greybeard]

the discs are rounded no serrations, there are no bars up in air like that , looks just like f38 picture in cub book i have but has five discs, and tray for weights on each half, thanks fast ans. from big dog, george

[Don McCombs]

Here's a picture of a 28A.

[greybeard]

snowing like crazy out there , had to put boots on and go look at it again, been 3 months since put it in back garage, looks very much like don's picture, the trays on each half look factory built and there are scrapers on all the discs and it does have the bars going up i tied them off didnt remember must be version of 28a thanks don and big dog for help, geo.

[Eugene]

Is this one for a cub or made for a larger tractor.

If the disc came with the Cub - the Cub can probably handle it.

Take a look at Don's photo. If your disc is quite a bit larger than the one in Don's photo the Cub may not be able to handle it. The only way to know for sure is to try it.

[Jim Becker]

The #38 was available for the Cub in both 4' and 5' versions (8 or 10 disks). The disks could be either solid or notched.