Priming and Painting

Fri Jan 30, 2004 7:22 pm

Does anyone have any tips on priming and painting a cub? Also any tips on installing a new cylinder head and gasket. Thanks all!

Fri Jan 30, 2004 11:30 pm

Use copper coat on head gasket and follow instructions in the manual.

Painting:
A good, easy and inexpensive way to paint your tractor is with the Case-IH Iron guard primer and the Case-IH paint. some guys will throw a little hardner in the paint to keep it glossy and Red longer.
The finest paint job I ever say on a tractor was one done by Geoff Gauger and it will put all of the base coat / clear coat paint jobs to shame and he uses IH paint.
Mike

Sat Jan 31, 2004 7:18 pm

Mike,

Do you know who makes Case/IH paint? I asked one of the dealers at the Cub-arama last September and they thought it was a paint company by the name of Van Sickle.

Jack Fowler

Mon Feb 02, 2004 7:14 pm

I believe that IH paint is (or at least was) made by Dupont ( the makers of Centauri).

Thu Feb 05, 2004 9:59 pm

Painting and priming all depends on the job you want to do. If you want to just keep your tractor from rusting and are going to use your tractor buy the cheaper paints. If you are going to spend 200 or 300 hours restoring you may want to pay for the better paints and primers. I may can help you out with some questions on paint and primers. If I don't know I might be able to find out for you. Pup.

Thu Feb 05, 2004 10:25 pm

If I am not mistaken, I remember Case/IH paint being supplied by Valspar Corp. Bermuda Ken can verify this information.