This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
adding hydrolics to a non hydro cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 357
- Joined: Mon Jul 11, 2005 7:25 pm
- eBay ID: huntingpal
- Location: southern indiana/ spencer county
adding hydrolics to a non hydro cub
I am still thinking about switching over my non touch control cub to hydrolics. After looking over my 59 with TC I noticed it has a longer dipstick/tube than the 48 with no TC. Is the longer tube and dipstick needed to get the hydrolic lines through to the TC block? or will it all work without thwe longer tube/dipstick? thanks for any assistance
- Ralph
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
To my mind.. the length of the dipstick has nothing to do with whether or not Touch Control Hydraulics and be installed or not. Many 47 Cubs have had Hydraulics or TC retro-fitted during the course of their life. Granny my 47 will get my second hydraulic setup - as she already has the Hydraulic pump installed. It should be a relatively easy install even for me to put the TC on Granny. Mostly it will be connecting the manifolds to the Hydraulic Pump and to the reservoir and bolting the reservoir down and in place. The most complicated part will be putting on the controls I think.. mostly cause there is more than 2 screws involved..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 357
- Joined: Mon Jul 11, 2005 7:25 pm
- eBay ID: huntingpal
- Location: southern indiana/ spencer county
thanks
Thanks guys I was just woried that when I put the lines on that I might not be able to get the dipstick out to check oil level without the longer dipstick. All looks good -- thanks again. Ralph what is the best way to get ahold of you? I have tried e-mails a couple times but get no reply. I think you told me once it is something in your server blocking it??? I am a computer dumby for sure I have had problems getting or sending some e-mails because of our set up to prevent virusus and smam coming in on our end of the e-mail so it might be at my end. Thanks again
- Don McCombs
- Team Cub Mentor
- Posts: 17488
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
Rudi wrote: Granny my 47 will get my second hydraulic setup - as she already has the Hydraulic pump installed.
Rudi,
Maybe my concern is unwarranted, but has Granny's pump ever been run without the rest of the system in place? I expect the life of a pump without hydraulic oil would be very short.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 357
- Joined: Mon Jul 11, 2005 7:25 pm
- eBay ID: huntingpal
- Location: southern indiana/ spencer county
- Ralph
- Cub Pro
- Posts: 2673
- Joined: Sun Feb 02, 2003 7:01 pm
- Zip Code: 41005
- Tractors Owned: Near 200 cubs through the years
- Circle of Safety: Y
- Location: Ky Florence Y'ALL
i have only had the phone at the shop for a couple months.
and for some reason when i try to respond to your e- mail it bounces back as undelierable .
my phone number is also on all my signatures
Thanks Ralph
and for some reason when i try to respond to your e- mail it bounces back as undelierable .
my phone number is also on all my signatures
Thanks Ralph
Shoot low Sherriff they are Riding Shadows
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
4 Wheels move the body.....
2 Wheels move the Soul .....
Ralph in ky.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
George Willer wrote:Rudi wrote: Granny my 47 will get my second hydraulic setup - as she already has the Hydraulic pump installed.
Rudi,
Maybe my concern is unwarranted, but has Granny's pump ever been run without the rest of the system in place? I expect the life of a pump without hydraulic oil would be very short.
George:
I am not sure. That is why one of the things on my to do list is to check it out and see what is there. I have a feeling that it may need a rebuild at best and at worst replacement.. but I am fervently hoping not.... but one never knows...
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
Who is online
Users browsing this forum: No registered users and 51 guests