My 58 Cub came with grader blade however I want to plow snow with my 59 Loboy. I know that I will have to change parts. I figure I will need axle hanger bracket, pressure spring assembly, Right and left brace. Am I correct or will I have to change other parts too
I was also told that blade cannot be midmount on Loboy due to clearance is that correct
Thanks again
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
more grader blade questions
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 406
- Joined: Sat Feb 22, 2003 8:32 am
- Zip Code: 08848
- Tractors Owned: 58 Cub
59 Loboy
73 Cub blue&orange
107 Cub Cadet
IH 340 Utility
Kubota L3800
Gravely 566 - Circle of Safety: Y
- Location: Milford,NJ
more grader blade questions
All hat and no cattle.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
You might be further ahead to try to find a lo-boy blade. I think someone just advertised having 2 of them on the for-sale forum. And you are right on the mid mount.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 406
- Joined: Sat Feb 22, 2003 8:32 am
- Zip Code: 08848
- Tractors Owned: 58 Cub
59 Loboy
73 Cub blue&orange
107 Cub Cadet
IH 340 Utility
Kubota L3800
Gravely 566 - Circle of Safety: Y
- Location: Milford,NJ
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
yes
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 4948
- Joined: Tue Jun 08, 2004 3:04 pm
- Zip Code: 14559
- Circle of Safety: Y
- Location: Rochester, NY
Yeah, if you were to buy all the parts you needed to mount your blade on the LoBoy, you'd:
1. Take forever get there because individual parts are rare, and Murhpy's Law stipulates that that one special part you're missing will NEVER pop up for sale ANYWHERE.
2. Spend way more than a good used complete L54 with all the right parts, especially if you tried to buy them all as reproductions from TM Tractor.
TM has all the reproduction parts you need, but probably to the tune of $300 or so. I priced the parts to convert my L54 blade to mount on my Farmall... but before you get any ideas, I'm not interested in a trade I still want to be able to mount the blade on either tractor.
1. Take forever get there because individual parts are rare, and Murhpy's Law stipulates that that one special part you're missing will NEVER pop up for sale ANYWHERE.
2. Spend way more than a good used complete L54 with all the right parts, especially if you tried to buy them all as reproductions from TM Tractor.
TM has all the reproduction parts you need, but probably to the tune of $300 or so. I priced the parts to convert my L54 blade to mount on my Farmall... but before you get any ideas, I'm not interested in a trade I still want to be able to mount the blade on either tractor.
-
- 10+ Years
- Posts: 406
- Joined: Sat Feb 22, 2003 8:32 am
- Zip Code: 08848
- Tractors Owned: 58 Cub
59 Loboy
73 Cub blue&orange
107 Cub Cadet
IH 340 Utility
Kubota L3800
Gravely 566 - Circle of Safety: Y
- Location: Milford,NJ
I went to TM site and the 4 parts I think I need are 259 plus shipping.
Someone did approach me about a trade but I also would like to keep plow for both tractors.
I guess the smart thing to do would be wait and find blade for sale. I did see Loboy locally with blade for 1500. Does not appear to be a bad price but I do not think another tractor would go over.
Someone did approach me about a trade but I also would like to keep plow for both tractors.
I guess the smart thing to do would be wait and find blade for sale. I did see Loboy locally with blade for 1500. Does not appear to be a bad price but I do not think another tractor would go over.
All hat and no cattle.
- Don McCombs
- Team Cub Mentor
- Posts: 17479
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Who is online
Users browsing this forum: No registered users and 40 guests