This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

CUB DIFFERENCES

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
User avatar
Mag Man
10+ Years
10+ Years
Posts: 756
Joined: Mon Jun 28, 2004 3:34 pm
Location: Central NY
Contact:
Contact Mag Man

CUB DIFFERENCES

Postby Mag Man » Sat Jul 29, 2006 7:49 am

I have a guy asking a question about the J4 mag I have listed on ebay he wants to know if it will fit a cub lowboy . I said as long as its the C60 it should fit. Can any let me know the differences.
JON
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Postby Bus Driver » Sat Jul 29, 2006 8:07 am

As fas as I know the J4 is correct for all C60 engines. There are other IH mags that bolt directly to the Cub. The H4 will fit. But it has 35 deg of lag angle while the Cub has 13 deg. I have not tried it, but strongly suspect that the Cub engine would run poorly with that much lag angle (timing advance).
Luck favors those who are prepared
Top
User avatar
beaconlight
10+ Years
10+ Years
Posts: 7703
Joined: Thu Aug 19, 2004 2:31 pm
Zip Code: 10314
Location: NY Staten Island & Franklin

Postby beaconlight » Sat Jul 29, 2006 8:43 am

Fits power units that have a c60 too. Mine came off a thresher.

Bill
Bill

"Life's tough.It's even tougher if you're stupid."
- John Wayne

" We hang petty thieves and appoint the great ones to public office."
- Aesop
Top
User avatar
John *.?-!.* cub owner
Cub Pro
Cub Pro
Posts: 23701
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Postby John *.?-!.* cub owner » Sat Jul 29, 2006 8:55 am

You mihgt want to remind him that the governor timing will have to be correct for it to work. If iit has a distributor now, the governor timeing may be off. That's the reason the mag on Missey had been repalced with a distributor when I first got her (carless work in a shop).
If you are not part of the solution,
you are part of the problem!!!
Top
User avatar
Mag Man
10+ Years
10+ Years
Posts: 756
Joined: Mon Jun 28, 2004 3:34 pm
Location: Central NY
Contact:
Contact Mag Man

Postby Mag Man » Sat Jul 29, 2006 8:58 am

Same thing with mine John It was of 2 to 3 teeth. After I reset it its a different tractor. He said cub lowboy 154 I believe.
JON
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 45 guests