Rebuilding Zenith carburator

[a-dougk1]

I've seen various posts on rebuilding and repairing the IH carburator, but where do I get the parts to rebuild and repair a Zenith replacement carburator?

I had to remove the Zenith carburator on my '47 Cub to get the valve cover off to adjust the valves. It works fine after I put it back on, but it looks like someone dipped the whole carburator in tar. Sooner or later, it'll need to be fixed and I'd like to have the rebuilding parts available.

Thanks,
Doug

[dyt4000]

http://www.tmtractor.com/fl/3429fp.htm

[Donny M]

You can get a kit from your friendly, local, not cheap, Case/IH dealer.
The p/n you'll be needing is 395 320 R92. For a complete rebuild you'll also need p/n 368 357 R91. Why they chose to split things up is anyone's guess

[John(videodoc)]

boy they are fast, they answered it before i could even find the info.

Anyway, if you dont have a local caseih, i didnt see kits listed with our supports, so i found this link for you, ( http://www.cngco.com ) Talk with Ken, up there, he'll know what you need, use the part numbers Donny referred to. That should take care of it. John

[bigdaddy]

Hey Doug

If it's running good and you want a short term fix, good old fashioned carb cleaner.

bigdaddy