It appears that the spindle on one of my belly mowers (42C-4) is in great need of repair. I'm sure a number of you have rebuilt these spindles. I have not.
Are there any special tools needed to accomplish the job. Or any words of wisdom before I start
Thanks in advance
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need to rebuild a spindle
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 602
- Joined: Sun Jan 18, 2004 7:17 am
- Location: Farmington AR
Need to rebuild a spindle
Kirk
CUBS:
'49
CUBS:
'49
- beaconlight
- 10+ Years
- Posts: 7703
- Joined: Thu Aug 19, 2004 2:31 pm
- Zip Code: 10314
- Location: NY Staten Island & Franklin
I don't know about the spindles on a IH mower but I have used a 3/4 inch copper tubing thread to tubing fitting and a piece of tubing to pound on to remeve and set bearings on Swisher trail mowers.
Bill
Bill
Bill
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
"Life's tough.It's even tougher if you're stupid."
- John Wayne
" We hang petty thieves and appoint the great ones to public office."
- Aesop
Who is online
Users browsing this forum: DonMountain and 82 guests