New Cub, intro and questions

[Don McCombs]

Your grille would look like this…


Photo courtesy TM Tractor Parts

[Glen]

Hi,
Below is a page from the Cub and LoBoy parts manual showing the hood and grille style of your LoBoy, in the lower pic on the page. It tells the serial numbers when each style was used. The style yours is was from serial number 501 - 10000. There are other pages with other styles of Cubs and LoBoys.
https://farmallcub.com/rudi_cub/www.cle ... e%2011.jpg

The LoBoys of that style originally have a long metal name on each side of the hood saying INTERNATIONAL CUB, the letters are connected together. The name goes in the lower holes on the hood. The upper 2 holes on each side are not used, there isn't any name there on a LoBoy. The upper holes were used on the Farmall Cubs.
TM Tractor Parts doesn't sell the International Cub names, or I could post a pic of it.
I sent you a PM, you get to it at the top of the page.

It's not likely the rotary mower drives for a regular Cub fit on a LoBoy.

Below is the owner's manual for the McCormick number 1 Platform Carrier.
https://farmallcub.com/rudi_cub/www.cle ... index.html

Below are pics from TM Tractor Parts of the L22 Mower PTO pulley, it is different than a regular Cub uses for the Cub 22 Mower.
http://www.tmtractor.com/tm-tractor/gpt ... y3_001.htm

Below is a pic of a Cub platform carrier on a regular Cub.

[Don McCombs]

Your grille would look like this…


Photo courtesy TM Tractor Parts

Not exactly sure what went wrong with this post. The photo worked when I posted it.

[JNewton]

I can see it fine in the original post.

[Jim Becker]

Your grille would look like this…


Photo courtesy TM Tractor Parts

Not exactly sure what went wrong with this post. The photo worked when I posted it.

I just ran into this problem, not sure if I've had it before. I'm on a new computer so everything has changed.

Looking into settings on this browser(Edge), I find the statement "Insecure content is blocked by default on secure sites". This site is a secure site (URLs start with "HTTPS:"). TM's site is not secure (URLs start with "HTTP:"). This appears to be the reason for the image not showing. I think I could put tmtractor.com in as an exception to allow the images. The other option is to right click on them and display them as I need to. I'll probably go with option 2, at least until it becomes annoying.

[Don McCombs]

Right click and Open Image in New Tab worked. Thanks, Jim.