Rescue Cub in Brazil

[stephanev8brazil]

Hello,

My tires arrived from India.

[stephanev8brazil]

I am restoring my front wheels.

[stephanev8brazil]

I used ford fiesta Front Wheel to repair my rim .

[stephanev8brazil]

Hi,
Raymond Durban's Database shows that Cubs with engine serial numbers in the 135000's were used in 1951 Cubs.
The engine serial number is not the same as the tractor serial number, except on the first Cubs, in 1947.

Below is the Cub Database, in the 1st post on the page.

viewtopic.php?f=1&t=87029

There are casting date codes on the larger castings on Cubs. They tell the date when the parts were made. They use a letter for the year.
Below is info from TM Tractor showing what the codes are.

http://www.tmtractor.com/id/id_004.htm

The info below shows where the codes are.
The code on the clutch housing is usually partly behind the clutch pedal.
The code on the last part on the page, the steering gear housing, usually can't be seen with the tractor assembled.

http://www.tmtractor.com/id/castdate_loc.htm

Thank you Glen

[stephanev8brazil]

Remember, the tractor serial numbers matched the engine serial number early in production (1947), but at some point, they got separated and often they don't match. . . .

Note that (from the Cub database) the numbers only seem to match for about 2 months from the mid-May start until sometime in mid-July. Then the engine numbers leap forward by about 300 units. In the jumble that begins in mid-July, they are all over the place. This includes several there the engine number is less than the serial number. It isn't even safe to assume that there was no out of sequence engine use before mid-July.

Thanks Jim Becker.

[Clemsonfor]

Wow now that's craftsmanship on those wheels!! Those would be scrap here or used to cut pieces out like you needed there for patches.

[SamsFarm]

My bet is there is not many cub wheels floating around in Brazil like there is here!

Be interesting to know how many cubs there are in Brazil!

[Pap]

Those are some good looking tires and your wheels are looking great.

[stephanev8brazil]

My bet is there is not many cub wheels floating around in Brazil like there is here!

Be interesting to know how many cubs there are in Brazil!

Hello Samsfarm

In Brazil, I know moreless 10 cubs, off my tractor. Some in museum and other particular collection. In Brazil is not exist parts for cub. We are obliged to restore all parts our import from USA.

[stephanev8brazil]

Those are some good looking tires and your wheels are looking great.

Thanks Pap.

[stephanev8brazil]

Wow now that's craftsmanship on those wheels!! Those would be scrap here or used to cut pieces out like you needed there for patches.

Yes. Here is not exist good wheels for cub. I need restore with cut pieces from ford fiesta wheels, small Ford car.

[Clemsonfor]

Wow now that's craftsmanship on those wheels!! Those would be scrap here or used to cut pieces out like you needed there for patches.

Yes. Here is not exist good wheels for cub. I need restore with cut pieces from ford fiesta wheels, small Ford car.

Yep i know what a for festiva is. The one from the 90s and the current one. I thought you might of fabricated that or did you have to partially rebend it? Good work making something easily available work for you.

[Clemsonfor]

My bet is there is not many cub wheels floating around in Brazil like there is here!

Be interesting to know how many cubs there are in Brazil!

Oh yea I know that. Hence the fixing what he has.

[stephanev8brazil]

hello guys.
I waiting the rod bearings standart , arrive from USA. I need replace this part to continue assembly my engine.

[stephanev8brazil]

Hello. I am back.