This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Cub tail plow lift rods.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 43
- Joined: Wed Nov 18, 2015 8:29 am
- Zip Code: 35475
Cub tail plow lift rods.
Are the tail plow lift rods for fast hitch, the same as the tail plow lift rods for the cub with out the fast hitch ? I am talking about the eye, that attach at the lift arm. I have the fast hitch and I need a pair of rods, with the eye. I have the lower arm that the plow go on.
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Cub tail plow lift rods.
It took me a while to come up with a guess as to what you are asking about. My guess is that you are asking about the pressure rods for the rear section of the Cub-144 cultivator. If so, the pressure rods are slightly different. The pressure rod swivels (at the top of the rods) have a smaller hole for the Fast-Hitch. You can use the non-Fast-Hitch parts by using a machine bushing to sleeve the Fast-Hitch pins up to the non-Fast-Hitch size.
If this isn't what you are asking about, rephrase the question. Or post a picture of what you have and are trying to connect together.
If this isn't what you are asking about, rephrase the question. Or post a picture of what you have and are trying to connect together.
-
- 5+ Years
- Posts: 43
- Joined: Wed Nov 18, 2015 8:29 am
- Zip Code: 35475
Re: Cub tail plow lift rods.
Thanks, had not though of that. If I can not find the FH ones, I will make a bushing.
Who is online
Users browsing this forum: No registered users and 57 guests