This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Torque for Rear crankshaft seal retainer bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
jackwest
- 5+ Years
- Posts: 6
- Joined: Sat May 19, 2018 8:28 pm
- Zip Code: 81052
Torque for Rear crankshaft seal retainer bolts
Hello. Does anyone know the correct torque setting for the rear crankshaft seal retainer bolts on a 1952 Farmall Cub?
-
rockfarmer
- 5+ Years
- Posts: 515
- Joined: Mon Apr 13, 2015 6:35 pm
- Zip Code: 78633
- Tractors Owned: 1947 Circle Cub
1948 Cub
1949 Cub (Rocky)
1950 Cub
1962 Cub - Circle of Safety: Y
Re: Torque for Rear crankshaft seal retainer bolts
Check the quick links I believe the spec is 15 ft-lbs. Be careful not to over tighten as the alloy will warp, if not already warped.
Who is online
Users browsing this forum: Leewebb7 and 19 guests
