snowplow

[mrfrost]

HEY FELLAS
I JUST GOT A SNOW PLOW
NOT SURE WHAT ATTACHMENTS ILL NEED
I SPONGE INFO OFF OF YOU GUYS ALL THE TIME
ALL I HAVE IS THE BLADE FRAME AND TWO ARMS THAT FLIP UP
I HAVE HYDRAULICS THAT FINALLY WORK
ANY PICS OF PLOWS WOULD BE GREATLY APPRECIATED

[awander]

try:

http://www.tm-tractor.com/gim/blade54_001.htm

and

http://www.tm-tractor.com/gim/blade54a_001.htm

[Rudi]

mrfrost:

First, to the greatest forum on the internet, and to the Cub Family. You will find that all the folks on this forum are kind, helpful and just full of Cub info and knowledge. They also happen to be the finest folks I have ever met

I would suggest that you visit the Cub Manual Server at the link below and then have a look at the Blades link under Cub Implement Manuals. That should be helpful provided of course the unit you purchased is actually for the Cub. You did not indicate which model blade you purchased, so I can only assume that it is indeedy for your Cub. If not, and you have a few pics, they may be useful in assisting your.

Let us know if this is of some help to you... I am not sure if you have seen the Welcome Wagon during your lurking periods, so here it is just in case.

Ok, so here is the spiel :

I would suggest that you read this thread: New Members and Visitors, Please READ Prior to Posting. There are many great links to informative pages such as the ATIS FAQ's 1 and ATIS FAQ's 2, The Best of H.L. Chauvin who has written very interesting articles on troubleshooting common problems with your Cub.


Also, you might want to visit the Cub Manual Server as there is tons of info on servicing, maintaining and re-building your Cub. In addition to this basic information, there are also a number of other useful tools available on the server. There is the Specialty Services page which has contact info for neat stuff like getting your seats recovered, buying quality Decals, Serial Number tags and a host of other neat items. Also there are the Parts Pages - both Used Parts Suppliers and New Parts Suppliers pages with links to quality dealers. I am always looking for YOUR favourite dealers for New and Used Parts to include here. These are intended to complement the businesses who support FarmallCub.com Website.

I would also recommend that you visit Binder Books and purchase the three most important manuals you can own for Maintenance, Repair and Rebuilding your Cub. These are the Owner's Manual, the GSS-1411 Service Manual and the TC-37F Parts Manual. Although they are available on the Cub Manual Server, it is better is you also have your own paper copy. Binder Books is the only Authorized IH Publication Reprint House and they have the best quality manuals available. Most other's are not of the same quality. Just a personal thought here, the I&T Shop Manuals, although helpful in some areas, really are not sufficient for the job. If you wish though, they are good additional reference works.

IF you really want to get the skinny on all things Cub, might I suggest you get a copy of Ken Updike's Farmall Cub and Cub Cadet's . Along with Guy Fay's Letter Series Originality Guide, these are two must have's in anyone's collection.

In addition to the above information, don't forget to check out the various articles that are available to help with your Repair, Restore, Rebuild or just your Maintenance Projects. There are a number of sub pages such as Electrolysis or Rust Zapper's, Maintenance Tips, Jigs and Techniques, Implement and Part Sketches and of course the Paint, Decals & Other Finish Questions which has the Paint Chart and the Paint Committee Decisions links.

I truly hope that you enjoy your Cub and that you will be a frequent contributor to the forum. Again, to the Cub Family

[Buzzard Wing]

Can you show us what you have with the plow.
JN just did a great job of re-engineering a plow.... Try the SEARCH function!