Hydraulic fluid return fitting

[jeepnfly]

I have finally been able to install the IH 1000 loader I purchased 3 months ago. I have been able to get everything together. It came with a return fitting that I thought was going to be correct, but it wasn't. Does anyone know were I can get one of these without having it made by my local machine shop? I talked with the local shop and they said that they could make them but if anyone else had mass-produced them I could probably get it cheaper. Any help would be welcomed.

I would also like to hear how some of you with this same loader got it installed. It was a daunting task by myself and wonder if there is an easier way.

[Rick Prentice]

Hi jeepnfly. I think I remember WKPoor's friend making and selling the return fittings. You might send WK a personal message and ask him. Rick

[Rudi]

jeepnfly:

Check out the Cub Manual Server under Specialty Services..... see below...

Oh and btw forgot

First, to the greatest forum on the internet, and to the Cub Family. You will find that all the folks on this forum are kind, helpful and just full of Cub info and knowledge. They also happen to be the finest folks I have ever met

Ok, so here is the spiel :

I would suggest that you read this thread: New Members and Visitors, Please READ Prior to Posting. There are many great links to informative pages such as the ATIS FAQ's 1 and ATIS FAQ's 2, The Best of H.L. Chauvin who has written very interesting articles on troubleshooting common problems with your Cub.


Also, you might want to visit the Cub Manual Server as there is tons of info on servicing, maintaining and re-building your Cub. In addition to this basic information, there are also a number of other useful tools available on the server. There is the Specialty Services page which has contact info for neat stuff like getting your seats recovered, buying quality Decals, Serial Number tags and a host of other neat items. Also there are the Parts Pages - both Used Parts Suppliers and New Parts Suppliers pages with links to quality dealers. I am always looking for YOUR favourite dealers for New and Used Parts to include here. These are intended to complement the businesses who support FarmallCub.com Website.

I would also recommend that you visit Binder Books and purchase the three most important manuals you can own for Maintenance, Repair and Rebuilding your Cub. These are the Owner's Manual, the GSS-1411 Service Manual and the TC-37F Parts Manual. Although they are available on the Cub Manual Server, it is better is you also have your own paper copy. Binder Books is the only Authorized IH Publication Reprint House and they have the best quality manuals available. Most other's are not of the same quality. Just a personal thought here, the I&T Shop Manuals, although helpful in some areas, really are not sufficient for the job. If you wish though, they are good additional reference works.

In addition to the above information, don't forget to check out the various articles that are available to help with your Repair, Restore, Rebuild or just your Maintenance Projects. There are a number of sub pages such as Electrolysis or Rust Zapper's, Maintenance Tips, Jigs and Techniques, Implement and Part Sketches and of course the Paint, Decals & Other Finish Questions which has the Paint Chart and the Paint Committee Decisions links.

I truly hope that you enjoy your Cub and that you will be a frequent contributor to the forum. Again, to the Cub Family

[Dan Robertson]

This is the part you are looking for. Screws into the TC fill plug opening. Purchased from WK poor. Very good quality, reasonable price, and prompt shipment.