I know on the FH equipped tractors there was a little tab on the fender that one side of the helper spring bracket bolted to.
Is the fender otherwise the same as a regular Cub fender, or was it made out of a thicker material?
Al
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
FH Helper Spring Fender reinforcement?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
Super A
- 10+ Years
- Posts: 5234
- Joined: Mon Jan 26, 2004 10:53 am
- Zip Code: 28521
- Tractors Owned: Collector of Super As, Corn Pickers, and a buncha other junk. Even a Cub now and then...
- Circle of Safety: Y
- Location: NC, Jacksonville area
FH Helper Spring Fender reinforcement?
White Demo Super A Restoration Updates
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
Let us pray for farmers and all who prepare the soil for planting, that the seeds they sow may lead to a bountiful harvest.
Celebrating 75 years of the Super A: 1947-2022
-
Rob in NH
- 10+ Years
- Posts: 2729
- Joined: Sun Oct 03, 2004 7:11 am
- Zip Code: 03848
- eBay ID: panelbeata
- Tractors Owned: 1947 circle cub
1950 cub demonstrator
1957 cub
1967 cub - Circle of Safety: Y
- Location: NH, Kingston
- Contact:
Re: FH Helper Spring Fender reinforcement?
i'm pretty sure its the same thickness, just has the added bracket.
-
tmays
- 10+ Years
- Posts: 3413
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: FH Helper Spring Fender reinforcement?
Same. Bob happened to have one of the reinforcement plates handy and Raymond was generous in welding it to my regular fender at DSCF. Fit was good. Thanks again, fellers!
Edit: Originally holes were drilled through the plate and fender and hole was welded. I just had Raymond stitch weld mine around the perimeter
Edit: Originally holes were drilled through the plate and fender and hole was welded. I just had Raymond stitch weld mine around the perimeter
Thomas
Who is online
Users browsing this forum: darkmuncan81, tnestell and 50 guests
